pagescas.blogg.se

The pro trinket features Microchip’s ATtiny85 MCU with 8KB program flash, 20 MIPS CPU, 5 PWMs, 2 8 bit timers.

Small form factor means it can easily be incorporated into prototype/ design. It is compatible with the Arduino IDE, and it is directly programmable thanks to its micro-USB port.Adafruit Pro Trinket Mini MicrocontrollersĪdafruit Pro Trinket 5V development board Measures only 38 mm x 18 mm x 2 mm (1.5" x 0.7" x 0.2") (without headers) Provides easy and simple access to the ATtiny85 MCU for development and programming. The bootloader uses 4KB of Flash, which limits the sketch to 28,672 bytes.The card does not integrated USB-serial converter.The 5V regulator bit provide only 150 my.Pins 2 and 7 are available, because reserved for the USB part.Therefore, it is possible to program this card in the Arduino IDE. The Arduino Pro 5V card uses the ATMEGA328 microcontroller, which the m ^ me on the Arduino UNO/Duemilanove/Mini/etc card with the same voltage and the same clock speed. Map Trinket pro measures 38mm x 18mm x 2mm without connectors, which is very small but with the same capability as a card Arduino UNO, this means that when you have finished a prototype on Arduino UNO Board, you can wear easily on the Trinket Pro card, but smaller. The Trinket Pro card has been designed in the succesion of the Trinket card, but with a little more pine, a little over flash and a bit more RAM, 18 GPIO, 2 extra analog pines, 28K flash and 2K of RAM.Īs the card Trinket, Trinket Pro card has USB support for loading but you can use a serial TTL shape with an FTDI cable or a USB2Serial.

Simply put, it's like an Arduino Pro Mini card but with more pine and a micro USB connector. The Adafruit Trinket Pro 5V card combines everything what you like on the Trinket maps and with the familiarity of the Arduino environment through its ATMEGA328 microcontroller.